Product Details:
Material Grade | SS316 |
Single Piece Length | 6 to 12 meter |
Shape | Round |
Surface Treatment | Galvanized |
Material | Stainless Steel |
Application | Manufacturing |
Bright Bars Product Specifications
Size range | 1 mm to 100 mm (1/16 inch – 4 inch) |
Size Tolerances | h9, h10, h11, k12, k13, etc. |
Length | 2 metres to 6 metres |
Crack Test | Magnetic Particle Inspection (MPI) |
Ultrasonic Test | 100% tested through Digital Ultrasonic Flaw Detector, as per ASTM A-388, EN 10308 |
Length Tolerance | Available in special cut to length bars in tolerance -0/+10 mm (-0/+0.5 inch) |
Surface Finish | Centreless Ground & Belt Polished up to Ra value 0.2 microns (12 RMS) and 24 – 320 Grit Polished |
Heat Treatment | Annealed, Solution Annealed, |
The major factors that validate the outstanding properties of our bright bars are:
· It’s chemical composition & Mechanical Properties
· Latest Technology used in our Managed Metallurgical Operations
· Free from any internal defects
Product Details:
Usage/Application | Construction |
Thickness/Diameter | 0-1 inch, 1-2 inch, 2-3 inch, 3-4 inch, >4 inch |
Single Piece Length | 6 meter, 3 meter, >36 meter, 18 meter, 36 meter |
Condition | New |
Minimum Order Quantity | 30 Kilogram |
Material Grade | Stainless Steel 440B (UNS UNS S44003) |
Standard | ASTM / ASME SA A276, A479, ASTM A484 |
Ovality | 0.20 mm Maximum |
Surface Defect | 1% of Diameter Maximum |
Size | 5.5 mm to 26 mm (0.0217" to 1.000") |
Tolerance (mm) | +/- 0.20mm |
Grade | C | Mn | Si | P | S | Cr | Ni |
440B | 0.6 - 0.75 | 1.00 max | 1.00 max | 0.04 max | 0.030 max | 16.00 - 18.00 | - |
Tempering Temperature (°C) | Tensile Strength (MPa) | Yield Strength 0.2% Proof (MPa) | Elongation (% in 50mm) | Hardness Rockwell (HR C) | Impact Charpy V (J) |
Annealed* | 758 | 448 | 14 | 269HB max | - |
204 | 2030 | 1900 | 4 | 59 | 9 |
260 | 1960 | 1830 | 4 | 57 | 9 |
316 | 1860 | 1740 | 4 | 56 | 9 |
371 | 1790 | 1660 | 4 | 56 | 9 |
Minimum Order Quantity20 KilogramBrandRathi, Kamdhenu, Essar Steel, Jindal SAILSize>40 mm, 1-10 mm, 10-20 mm, 20-30 mm, 30-40 mmGradeFe 550, Fe 500, Fe 500D, Fe 415, CRMUnit Length6 m, 3 m, 6 m, 12 m,18, >18, 3 m, 9 m, 12 mStandardJIS G3109, ASTM A706, BS4449, ASTM A615, JIS G3112
We are offering Stainless Steel Hex Bar.
Features:
Long lasting
Lightweight
Non-corrosive
Specifications:
Range: 6.00 mm to 350 mm diameter
Hex Bars:
Grade: 304, 304L, 304H, 309, 310, 310S, 316, 316Ti, 316 L, 317, 317L, 321, 347, 347 H, 409, 410, 410S, 420, 430, 431.
Duplex Hex Bars:
Grade: 2205 (UNS No. S31803), 2507 (UNS No. S32750)
Nickel Alloy Hex Bars:
Grade: Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade I & II)
Copper Alloy Hex Bars:
Grade: UNS No. C 10100, 10200, 10300, 10800, 12000, 12200, 70600, 71500, UNS No. C 70600 (Cu -Ni- 90/10), C 71500 (Cu -Ni- 70/30)
Note:
Rates are subject to change as per the Daily market situation.
Rates given above are approximate market rates and will be valid only after formal discussion and 100% payment in advance.
Payment 100% in advance by RTGS/NEFT.
Standard
GB, AISI/JIS, SUS, UNS, DIN 17440 17220(BS970 Part4)
Material
201 202 204 207 207CU 301 302 303 303B 304 304L 304N 308 308L 308 LSI 309 309L 309LSI 309S 309SI 310 310S 314 316 316L 316LSI 321 330 347 348 384 410 420 430
OD
1.0-400mm
Length
3000mm, 6000mm or according to the customer's requirement
Type
Round bar, square bar, flat bar, hexagon bar, channel bar, angle bar, threaded bar
Product Details:
Shape | Round |
Material | Stainless Steel |
Surface Finish | Polished |
Grade | SS304 |
Single Piece Length | 6 meter |
We are offering 304 Stainless Steel Round Bar.
Bright Bars Product Specifications
Size range
1 mm to 100 mm (1/16 inch – 4 inch)
Size Tolerances
h9, h10, h11, k12, k13, etc.
Length
2 metres to 6 metres
Crack Test
Magnetic Particle Inspection (MPI)
Ultrasonic Test
100% tested through Digital Ultrasonic Flaw Detector, as per ASTM A-388, EN 10308
Length Tolerance
Available in special cut to length bars in tolerance -0/+10 mm (-0/+0.5 inch)
Surface Finish
Centreless Ground & Belt Polished up to Ra value 0.2 microns (12 RMS) and 24 – 320 Grit Polished
Heat Treatment
Annealed, Solution Annealed,
The major factors that validate the outstanding properties of our bright bars are:
· It’s chemical composition & Mechanical Properties
· Latest Technology used in our Managed Metallurgical Operations
· Free from any internal defects
Minimum Order Quantity | 30 Kilogram |
Application | Construction |
Technique | Hot Rolled |
Range | 5 mm To 500 mm thick in 100 mm TO 6000 mm Length |
Other Grade | 17-4PH, 15.5 PH |
Form | Round, Square, Hex (A/F), Bush, Rectangle, Flat, Wire Mesh |
Finish | Bright Round Bar,Black Round Bar,Polish Round Bar |